Toll Free 800-459-2148 Local 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills Automatic Feed Band Sawmills Hydraulic Band Sawmills
Higher Production Band Sawmills 1-2 Man Circular Sawmills Handset Circular Sawmills
Auto/Semiauto Circular Sawmills Support Equipment
Complete Operations For Sale Auxiliary Equipment Industrial Equipment
Click on the equipment category you are interested in to see the ads (or, just scroll down the page)
|
BANDING/STRAPPING BLADES - Bands - Saws COMPONENTS - Air Compressors - Attachments - Extensions |
- Feedworks - Lasers - Log Turners - Miscellaneous - Topsaw DECKING & TRANSFERS - Conveyors - Descramblers - Greenchain |
- Log Decks - Roller Beds - Slab Decks/Racks - Sorting Table - Stacking Decks - Sweep Table - Transfer Decks FORESTRY WINCH |
LUMBER CARTS |
SAWDUST
REMOVAL SHAPERS SHARPENERS SPECIALTY SAWS - Lath Mill - Panel Saws - Radial Arm Saws - Routers - Table Saws |
This page includes the auxiliary equipment of complete operations for sale through Sawmill Exchange.
All equipment listed is privately owned. We do not represent any manufacturers or dealers. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: US/Canada Toll Free: 800-459-2148 or Local: 1-205-969-0007.
All prices in U.S. $
| State/ Province |
Mill Type |
Ad # |
Auxiliary Equipment |
Price (U.S.$) |
| Air Compressors | ||||
| Kentucky | Air Compressor | 9372 | Three air compressors, 3-phase power, older models but run fine. Will separately for $500.00 each. | $1,250.00 |
Michigan |
Air Compressor | 12123 | Quincy 25 HP air compressor, 3-phase, water cooled. No tank. | $500.00 |
Michigan |
Air Compressor | 12149 | Hydrovane 218 fin air compressor, 50 HP 440 | $2,000.00 |
Virginia |
Air Compresssor | 13139 | Three Ingersoll Rand T-30 air compressors, each in good working condition. | $2,500.00 |
Virginia |
Air Compresssor | 13140 | Kaeser SK-19 air compressor, excellent condition. | $4,000.00 |
West Virginia |
Air Compressor | 11709 | Emglo Model T 25HP tank-mounted air compressor | $2,000.00 |
| Attachments | ||||
| Mississippi | Attachments | 10415 | Cat 8 ft. wide (2 1/2 yard) bucket for quick couple. Probably works best with 918 or 924 series. | $3,500.00 |
West Virginia |
Attachments | 13088 | Worksaver Log Grapple. Mounts on front end loader of farm tractor or backhoe. Has all hook ups and hoses. Like new, only used for 2 weeks. Also will work for brush, rocks, and round hay bales. | $3,000.00 |
| Bands | ||||
Arkansas |
Bands | 11307 | International Knife & Saw wide bands, two new 10" x 32'5", 15-gauge, 1 3/4" tooth spacing, and three 11" x 47', 1 3/4" tooth spacing | $2,100.00 |
| Banding/Strapping Equipment | ||||
|
None currently available. | |||
Georgia |
Plastic Film Wrapping | 12321 | 2007 Robopac Start Maxi plastic film wrapping machine, 59" turntable rotates 10 times per minute, front and rear forklift opening, single phase 220V with soft start. Extras include automated wrap cycle with laser eye for 1, 2 or 3 wraps and adjustable brake tensioner. Currently in use wrapping 800 pallets of finished wood products per shift. | $2,750.00 |
| Michigan | Banding/ Strapping | 10340 | Two Signode AMP Model 1-34 banding tools for 3/4" steel banding, air operated. One rebuilt and not used since. Selling for $1,000.00 .One leaks some air. | $750.00 |
New Jersey |
Banding/ Strapping | 12941 | 1/2" strapping kit with 1 roll steel banding, tightener and crimper/cutter. | $500.00 |
North Carolina |
Stretch Wrapper | 12622 | 1996 Lantech Lan-ringer stretch wrapping machine, 75" ring, 48" conveyor, Allen Bradley 1305 PLC controls, 230/460 dual 3-phase motors. Not just excellent, but pristine condition. Over $150,000.00 new. | $19,000.00 |
| Chip Vans | ||||
| South Carolina | Chip Van | 10440 | 1999 ITE chip van, similar to Peerless, open top, new tires, around 42' length. | $18,000.00 |
| Conveyors | ||||
| Alabama | Conveyor | 9873 | 100' bark conveyor with trough, 5 HP 3-phase power. | $7,500.00 |
Alabama |
Conveyor | 13047 | 600' of 36" and 24" traugh conveyors with belts. No power. | $3,000.00 |
Alabama |
Conveyor | 13052 | 106' x 36" belt conveyor truck loading system, gravity tension system, 12' wide vertigate to switch from one truck to another. Includes over 100' of 36" traugh conveyor, 35-degree incline, gravity tension system. | $15,000.00 |
Alabama |
Conveyor | 13053 | 40' X 16" box-chain conveyor, gear boxes included. No power. | $500.00 |
Missouri |
Barnsweep |
13221 | Patz 80' Barnsweep, totally rebuilt, excellent running condition. | $3500.00 |
Oregon |
Conveyor | 11447 | 24"x65' belt conveyor with catwalk, 15 hp 3-phase motor and gear box on S-drive | $2,500.00 |
Oregon |
Infeed Rolls | 13147 | Variety of infeed rolls, including pineapple and the bridge rolls. | $3,000.00 |
|
New Listing Pennsylvania |
Lumber Rolls | 13310 | 15 sections of 10' long x 2' wide lumber rolls, 2" diameter rollers 5" apart. | $1,500.00 |
Vermont |
Conveyor | 12345 | 130’ of 18" live belt, 16’ sections, 5" sides, 5 HP 3-phase electric, 12 yrs old, under 5000 light duty hours, using for wood waste in working operation. | $3,500.00 |
| Descramblers | ||||
| None currently available. | ||||
| Electrical | ||||
Arkansas |
Phase Converter | 12605 | Rotary 3-phase converter, 60 HP motor, includes starter boxes. | $3,000.00 |
Michigan |
Phase Converter | 13079 | Baker 3-phase converter, 25 HP. Excellent condition. | $2,250.00 |
Oregon |
Transformer | 11450 | Weaver Electric 50 KVA dry transformer, 240/460 3-phase. | $500.00 |
Wisconsin |
Phase Converter | 12645 | Phase converter with step up transformer to 440/480. Will run up to four 25 HP or smaller motors. Includes 240 and 440 amp breaker boxes. | $1,400.00 |
Wisconsin |
Phase Converter | 13196 | Gentech 3-phase converter, 50 HP. | $2.200.00 |
| Extensions | ||||
Illinois |
Extension | 12466 | 1998 24' track extension for Wood-Mizer LT40HD series | $2,500.00 |
| Feedworks | ||||
Alabama |
Feedworks | 13034 | Tyrone-Berry SMA-230 carriage drive, complete with drum cable and controls. | $5,500.00 |
Ohio |
Feedworks | 13157 | 213 Tyrone-Berry feedworks, excellent conditions, includes drum package. | $3,500.00 |
| Forestry Winches | ||||
| South Carolina | Winch | 10441 | Carco/Paccar G80 hydraulic winch, 1" cable, can fit on D-7 or D-8 Cat, more. Over $50,000 new. | $12,000.00 |
| Forklifts | ||||
Alabama |
Forklift | 13101 | 1974 Cat V225 25,000# forklift, 12' lift capacity, good tires, good paint, still tight machine. | $16,500.00 |
| British Columbia | Forklift | 9595 | Komatsu 8000# forklift with new front tires and battery. Manual steering. Includes all components for power steering. Only 10 hours since tune up. Not pretty but runs good. | $5,500.00 |
|
New Listing British Columbia |
Forklift | 13306 | TCM FG20 5000# forklift, 2-stage lift, 4-cylinder Nissan gas engine, new rubber, new starter. 1800 hours. Needs tune up. |
$3,500.00 US$ |
| Connecticut | Forklift | 8998 | Clark-Ross 16000# rough terrain forklift, 24' lift capacity, dual front wheels, wider back steering wheels, 6 cylinder Continental gas engine, 4 speed transmission. Needs some work, but basically in good shape | $8,500.00 |
| Illinois | Forklift | 9743 | Hyster 6000# electric forklift with charger, 3-stage mast. Now includes reconditioned battery and new hydraulic seals. | $3,000.00 |
Iowa |
Forklift | 12157 | 1987 Toyota 5000# propane forklift with side shift, solid tires, new engine, new radiator, new battery, new seat. | $6,000.00 |
| Kentucky | Forklift | 8424 | 1991 Nissan pneumatic forklift, propane power, 2-stage, 3000 lb. capacity | $4,600.00 |
Maine |
Forklift | 12945 | 2005 JCB 520-40 telescopic loader/lift with brush forks with grapples, 96" bucket, and McMillan 24" auger, 4x4, 4-wheel steer, Perkins 50 HP diesel engine, auxiliary plumbing, open cab with guard, 4200 lb lift capacity at 13'2" full lift height. | $45,000.00 |
Michigan |
Forklift | 11562 | 1997 Toyota 9,000 lb. forklift, triple-stage mast, cushion rubber tires, 10,000 hours. Good running condition. | $14,000.00 |
Michigan |
Forklift | 13193 | Massey-Ferguson 6500 rough terrain forklift, 3000 hours. Front tires good shape. Rear tires poor. | $6,500.00 |
New Jersey |
Forklift | 12943 | 1966 Massey-Ferguson 2200 gas powered forklift, 25' lift, 5000 lb. capacity. Runs good. | $4,000.00 |
| New York | Forklift | 10393 | Cat DPL40 diesel forklift, 9000# capacity, dual drive, 6' wide carriage, 5' forks, 2-stage mast. Good condition. | $14,500.00 |
|
New Listing Ohio |
Forklift | 13312 | 2004 Linde H30T 5000# forklift, 2-stage mast, LP/gas, enclosed cab, low hours. | $12,500.00 |
Pennsylvania |
Forklift | 11641 | 1988 K-D Manitou 8000 lb. forklift, fair condition. | $5,000.00 |
Pennsylvania |
Forklift | 11642 | 1997 Viking 800 lb. forklift, large back tires. $40,000.00 new. | $15,000.00 |
Pennsylvania |
Forklift | 12670 | Yale/Eaton Towmotor GC040 series, electric with charger, 4000# capacity | $3,000.00 |
Tennessee |
Forklift | 12133 | 1969 Pettibone OS-3354-1, 6000 lb. lift, 4' log forks, 8' side shift, Detroit motor | $3,500.00 |
| Green Chain | ||||
| Alabama | Green Chain | 9872 | 70' 3-strand green chain, 5 HP 3-phase power. | $7,500.00 |
British Columbia |
Green Chain | 13068 | Green chain: 5 strand 24’ x 40’ rollertop chain with edge rollers, 5 HP drive with Crofts reducer, four 4’ x 10’ 5-roller lumber stacking decks. | $6,000.00 US$ |
Illinois |
Green chain | 12407 | Meadows 3-strand green chain, 9' x 22', rooftop chain, 3-phase electric drive | $4,250.00 |
Iowa |
Green Chain | 11901 | 4' strand 9' x 9' green chain, some M500 rooftop chain but not complete, 3-phase power. | $900.00 |
Michigan |
Green Chain | 12521 | 7'x40' 3-strand green chain, hydraulic drive. Built 2 yrs ago but never used. Always stored inside. | $6,000.00 |
Missouri |
Green Chain | 13227 | Baker 30' 2-strand green chain with motor and hoses. | $1,200.00 |
| Virginia | Green Chain | 10053 | 30' green chain in 10' sections for easy transport. Single phase power. | $3,000.00 |
| Lasers | ||||
| Indiana | Lasers | 10732 | Set of two ForestLine lasers, red color, 12-volt power, various hookups, converter boxes included. | $1,000.00 |
| Lath Mill | ||||
| None currently available | ||||
| Log Decks | ||||
Mississippi |
Log Deck | 13248 | Wood-Mizer 20' log deck | $5,500.00 |
North Carolina |
Cant Deck | 11959 | 16' 3-strand live cant deck, 10 stops | $1,000.00 |
Oregon |
Log deck | 13120 | 20' x 20' 5-strand live log deck, includes hydraulic motor and valves. No stop & load. | $2,500.00 |
| Log Turners | ||||
Illinois |
Log Turner | 12971 | Mellott #5 hydraulic chain type log turner. No power. | $1,750.00 |
| New York | Log Turner | 8954 | Corley 42" Bar Turner, brand new | $11,000.00 |
Ohio |
Log Turner | 12926 | Mellott 5100 hydraulic log turner, very good condition | $5,500.00 |
| Lumber Carts | ||||
| None currently available. | ||||
| Panel Saws | ||||
| None currently available. | ||||
| Power Units and Gensets | ||||
Colorado |
Power Unit | 13208 | Kohler 22 KW genset, hooked up for natural gas with converter for propane, includes primary/backup converter box, 381 hours. |
Reduced $4,200.00 |
Connecticut |
Power Unit | 12162 | 85 KW Mitsubishi genset, 100 gal fuel tank. | $7,500.00 |
Illinois |
Power Unit | 12608 | 1973 Detroit 671 with Rockford clutch, starts good, runs good, uses a little oil. | $3,000.00 |
Illinois |
Power Unit | 13032 | Mitsubishi Model 2070 diesel power unit with turbo, 207 HP at 2800 rpm, 180 HP at 1800 rpm, 1500 hours since overhaul. | $7,500.00 |
Indiana |
Power Unit | 11728 | D-318 Cat power unit with gas pony motor and clutch. Overhauled in 2002. Runs fine. Fuel efficient. Always under cover. | $3,500.00 |
Indiana |
Power Unit | 12579 | McCulty 100 KW 3-phase generator, Lister 155 HP diesel engine with clutch, everything skid mounted. 2500 hours. Will consider trade for a bandmill. | $8,750.00 |
Indiana |
Power Unit | 12609 | Two 250 HP 3-phase motors with soft starts. $2,000.00 each or $3,500.00 for both. | $3,500.00 |
Indiana |
Power Unit | 12684 | 125 KW General Electric standby genset with emergency backups and disconnects and boxes, Cummins power 220 3-phase. Mounted in 20' container. 1493 hours. | $5,500.00 |
Indiana |
Power Unit | 12844 | Cummins 200 KW genset, 290 Cummins engine with 2000 hours on rebuild. | $5,500.00 |
| Iowa | Power Unit | 10493 | Georgetown Hydraulics hydraulic power pack 550 gal. reservoir, 92 gpm closed center pump, four 40 gpm open center pumps, 18 gpm open center pump, 18" triple pump drive. Includes clutch attachment. No power. | $10,000.00 |
| Iowa | Power Unit | 10987 | Cat 3208 with clutch, good condition, runs fine. | $2,000.00 |
Iowa |
Power Unit | 11744 | 371 Detroit with hydraulic tank and pump | $2,500.00 |
Iowa |
Power Unit | 13064 | 5 cylinder Deutz diesel engine, 100 HP, 3500 hours. | $2,000.00 |
|
New Listing Iowa |
Power Unit | 13365 | Deutz BF6L913C 140 HP diesel engine with turbo, includes oil cooler, air cooler, twin disc clutch, 5 V-pulley, mounted on I-beam skid. 5500 hours. | $3,500.00 |
Louisiana |
Power Unit | 11907 | CAT 3406 diesel powered 365KW 600 HP generator, fully enclosed, 50 Hertz, 549 amps, 480 Volts, 1800 rev/min, Excellent condition. | $65,000.00 |
Michigan |
Power Unit | 11714 | 3-cylinder 29 HP diesel power unit, skid mounted, new radiator, new stub shaft, needs electrical. Perfect engine for air compressor or hydraulic pump. | $2,000.00 |
Michigan |
Power Unit | 12519 | Cummins 6BT 152 HP power unit, complete with radiator, fuel tank, twin disk hand clutch, new starter, alternator, and gauge panel. Excellent condition. Stored inside. | $5,500.00 |
Michigan |
Power Unit | 13056 | 471 Detroit, skid mount with radiator and snap clutch. Used only as a backup hydraulic power unit. | $1,950.00 |
Michigan |
Power Unit | 13057 | Cummins NTC270, 270 HP diesel power unit, Rockford clutch, skid mount | $2,900.00 |
|
New Listing Michigan |
Power Unit | 13375 | Onan 100 KW portable generator, 1989 Cummins 6BT engine rated at 135 HP at 1800 RPM, 1995 Stamford Newage generator, 3-phase or 220V single phase, 100 KW 125 KVA 190 amps 230/460V at 60 cycles. Includes 120V block heater and battery charger for standby use. Trailer package has ball hitch, hydraulic surge brakes and trailer lights. Enclosed unit. Runs good. | $8,500.00 |
Minnesota |
Power Unit | 11271 | White Hercules 6 cylinder D298ER 90HP diesel military motor, recently overhauled. | $2,500.00 |
Missouri |
Power Unit | 12008 | 2001 Iveco 170 HP diesel power unit, 4200 hours. | $7,000.00 |
Missouri |
Power Unit | 12931 | 350 Cummins power unit, rebuilt 32cfm air compressor, rebuilt injector pump, starter, alternator, and oil cooler. AP PTO, 10-groove pulley. | $4,500.00 |
Missouri |
Power Unit | 13117 | Cat 3024C diesel engine, 50 HP, stub shaft, 220 original hours. | $2,900.00 |
| Montana | Power Unit | 9786 | 250 Cummins diesel power on its own axle. Less than 100 hours on end frame motor overhaul. 10-speed transmission w/PTO shaft. Full gauge package. | $3,500.00 |
| Montana | Power Unit | 12735 | John Deere 4045D diesel power unit, 80 HP, 600 hours | $2,250.00 |
| Montana | Power Unit | 12736 | John Deere/Lima 4239D 37.5 KVA 3-phase genset, 24V with turbo | $1,500.00 |
| Montana | Power Unit | 12737 | Perkins 2048 60KVA 3-phase genset, 11,188 hours | $3,750.00 |
| New Hampshire | Power Unit | 10950 | 3-phase genset, 125 K.V.A. 240-220 V, 100 KW, 300 amps, 60 cycles, 4000 pounds, skid mounted, radiator cooled, P+H aluminum engine. | $1,800.00 |
| New York | Power Unit | 10391 | 471 Detroit with clutch. Runs excellent. |
Reduced $3,000.00 |
New York |
Power Unit | 11690 | General Electric 100 HP 3-phase electric motor, 1775 RPM. | $600.00 |
Ohio |
Power Unit | 12430 | 1999 Cat 113 KW genset, 200 amp 3-phase. All digital controls. 9000 hours. Includes separate fuel tank. Price firm. | $5,000.00 |
Ohio |
Power Unit | 13176 | 671 Detroit diesel power unit, starts easy and runs great, includes clutch and lots of power. | $2,500.00 |
Ohio |
Power Unit | 13238 | 671 Detroit power unit, runs fine. | $2,500.00 |
Oregon |
Power Unit | 13121 | 350 Cummins diesel engine, on skids. | $750.00 |
Pennsylvania |
Power Unit | 13167 | Genset Cat 3056 with 90 k.w. Generator engine has 7823 hrs. Generator was 152 hrs. after rebuild. Original owner. | $10,000.00 |
Pennsylvania |
Power Unit | 12051 | 160 HP Cummins diesel power in excellent condition. Offers considered. | $3,500.00 |
Pennsylvania |
Power Unit | 12419 | 3208 Cat with clutch, 210 HP, self contained in metal container, new batteries. | $3,200.00 |
Pennsylvania |
Power Unit | 12420 | Ford Industrial V-8 gas engine with Rockford clutch, governor needs repair. | $750.00 |
Pennsylvania |
Fuel Tank | 13042 | 5000 gallon fuel tank with electric pump and filters. | $2,500.00 |
|
New Listing Pennsylvania |
Power Unit | 13309 | John Deere Model 4239D 80 HP diesel engine, no turbo, low hours. | $3,800.00 |
South Carolina |
Power Unit | 12424 | Cummins NT270 with PTO shaft and clutch, mounted on skids. Runs good. Starts good. Good oil pressure. | $3,000.00 |
| Tennessee | Power Unit | 10095 | Detroit Diesel 12-cylinder twin-turbo 350 KW genset, under 1000 hours since major overhaul. | $9,000.00 |
| Tennessee | Power Unit | 10828 | Tri-Circle Engineering Model 170-F 5 HP diesel engine, air cooled electric start, muffler, fuel tank, air cleaner. Still in the crate. | $550.00 |
Tennessee |
Power Unit | 12375 | 450 KW genset, powered by Series 60 Detroit, 400 hours on total rebuild. | $11,500.00 |
Tennessee |
Power Unit | 12376 | 471 Detroit motor on skids. Was running fine when removed from service. No over 2,000 hours on a rebuild. | $3,000.00 |
Texas |
Power Unit | 12870 | 51 HP Cat diesel engine, purchased new in 2007 for a Wood-Mizer Super Hydraulic, 1026 hours. Last service in November 2009. Still under warranty. | $4,400.00 |
| Radial Arm Saws | ||||
British Columbia |
Radial Arm Saw | 13074 | Dewalt industrial radial arm saw, length gauge stops guide. | $1,500.00 US$ |
| Roller Beds | ||||
Alabama |
Roller beds | 13048 | 10' Maaco Industries hourglass rolls, separates bark debris from a debarker. | $2,500.00 |
Indiana |
Rollcase | 12405 | 40' Meadows live rollcase, 24" width, with 2 stop gates and transfer deck and collector deck off either side, 5 HP 3-phase electric | $9,500.00 |
Michigan |
Roller beds | 13191 | Roller beds: 90' of 24" rollers 6" on centers, 10' sections and 90 deegree turn included, 45 H-frames, 50' of 53" wide roller in five 10' sections 2.5" die 6" centers. | $1,500.00 |
| Mississippi | Roller beds | 10413 | Winston 24' live heavy duty rollcase with slab dump, 21" width, 6" rollers, stab kickers, 440 3-phase drive with starter and disconnect. | $3,500.00 |
|
New Listing Pennsylvania |
Rollcase | 13373 | Rollcases, 16" x 16' infeed and 16" x 16' outfeed, both with 4 air stops and power feed, electric power with 3 HP hydraulic pump. | $4,000.00 |
| Routers | ||||
| Colorado | Router | 8785 | Jet Pneumatic High Speed Overarm Router, Model # POR-22-3, 3 Phase power, pneumatic up/down spindle movement, 6 depth of cut adjustments, 2 spindle speeds with foot control, tilting table, air line control to adjust initial plunge speed, restrictor in head to adjust final plunge speed. | $1,500.00 |
| Sawdust Blowers, Sawdust Chains, Cyclones | ||||
Arkansas |
Sawdust | 11944 | Matthews Blow Pipe size 1523 sawdust blower, 14" inlet, 13" outlet, 29" fan. | $900.00 |
British Columbia |
Sawdust | 13069 | Sawdust system: Dayton 22" sawdust blower with 20HP drive, 20" uptake blower pipe, around 75, of 6" to 12" sawdust piping, 5" dia x 22’ fine sawdust Cyclone with stand. | $9,500.00 US$ |
| Florida | Sawdust | 9320 | Dayton dust vac, 13.5" wheel, 5" exhaust blower, includes 20' 5" flexible hose, 5 HP 3-phase. | $600.00 |
Illinois |
Sawdust | 12536 | Phillips 20" sawdust blower, built heavy duty, 5 HP 3-phase, includes 15' of piping. Little usage. | $1,000.00 |
Indiana |
Sawdust | 12698 | Bruning 20 HP sawdust blower with piping, 13" inlet, 12" outlet. | $1,500.00 |
|
New Listing Michigan |
Sawdust | 13335 | New York series 15 sawdust blower with 32" diameter cyclone,. Blower has 11" inlet, 10" outlet. Cyclone is 78" high on angle iron frame, 10" inlet, 10" return air outlet. No power. Good condition. | $1,300.00 |
New York |
Sawdust | 13097 | Dayton Model 3C049 sawdust/chip blower, 22" outlet, 5 HP 3-phase. Price firm. $2,800.00 new. | $1,200.00 |
Ohio |
Sawdust | 12432 | 50'' sawdust blower, 40 HP motor with starter. Price firm. | $3,000.00 |
Ontario |
Sawdust | 12372 | TimberWolf sawdust blower, 6 inlet, 6" outlet, 1300 cfm, 3 HP 220 V. Original owner. Still brand new. Never used. | $1,000.00 US$ |
Pennsylvania |
Sawdust | 13040 | Reckart sawdust blower, 15 HP. | $3,000.00 |
| Virginia | Sawdust | 12318 | Overhead sawdust auger leveling, truck loading for open top trailers w/steel frame |
Reduced $3,000.00 |
Wisconsin |
Sawdust | 13232 | Sawdust collector, heavy duty, 5' diameter, 15" intake. | $1,200.00 |
| Wyoming | Sawdust | 9289 | Reckart sawdust blower, 8" inlet, 8" outlet, 15 HP 3-phase, includes piping and elbows | $1,800.00 |
| Saws | ||||
Kentucky |
Saw | 11512 | Simonds 60" circle blade. Almost brand new. | $1,000.00 |
| Missouri | Saws | 9752 | 56" inserted tooth headsaw, good condition | $1,000.00 |
Ohio |
Saws | 12607 | Simonds 52" insert tooth sawblade, hammered for a left hand mill. | $450.00 |
Wisconsin |
Saws | 11747 | 56" inserted tooth headsaw, in excellent condition. | $1,050.00 |
| Scales | ||||
New Listing Texas |
Scale | 13341 | Scale, 60' length, 120,000 lb. capacity. Good condition. | $35,000.00 |
| Shapers | ||||
Oregon |
Shaper | 11664 | Custom built double head shaper with tongue and groove knives, handles up to 6" material, two 2 HP single phase motors. | $1,500.00 |
| Sharpeners (Band) | ||||
Iowa |
Sharpener: Band | 13179 | Wright automatic sharpener with Dino manual setter | $1,000.00 |
Kentucky |
Setter | 13122 | Suffolk dual tooth setter. Serious offers considered. | $800.00 |
Louisiana |
Sharpener: Band | 12636 | Baker Quick-Sharp sawmill mounted automatic sharpener with Dino setter | $1,200.00 |
New Jersey |
Sharpener: Band | 12939 | Dino semiautomatic band sharpener with manual setter | $1,200.00 |
|
New Listing Ohio |
Sharpener: Band | 13318 | Cook's Cat Claw automatic sharpener with dual tooth setter and band roller, includes 3 cams for 7/8" and 1" tooth spacing. | $2,850.00 |
Oregon |
Sharpener: Wide Band |
11451 | Povlsen automatic wide bandsaw grinder, works best on 1 3/4" tooth spacing | $1,200.00 |
Pennsylvania |
Sharpener: Band | 11478 | Wright automatic sharpener with manual setter | $1,200.00 |
Vermont |
Sharpener: Band | 13016 | Wright W-37ABG automatic sharpener with angle finder, includes Cooks single tooth manual setter. Also includes 5 grindling wheels. Almost brand new. | $1,625.00 |
Virginia |
Sharpener: Wide Band |
12273 | Two #220 Hanchett left hand grinders with stands. One #230 Hanchett right hand grinder with stands. | $6,000.00 |
| Wyoming | Sharpener: Band | 10685 | Hanchett #5 sash gang grinder, 3-phase power. | $2,500.00 |
| Sharpeners and Benching Equipment (Circle) | ||||
Arkansas |
Sharpener: Circle Mill | 11303 | Armstrong #17 grinder with 2 cams. Also sharpens trimmer and edger saws. | $1,500.00 |
| Georgia | Sharpener: Circle Mill | 9173 | Hoe Model 10 tooth grinder. | $350.00 |
Idaho |
Sharpener: Circle Mill | 12574 | Hanchett 104C, SN 194, 72" combination bench stretcher rolls complete with full hydraulic assist, anvil, electric boxes and assorted hardware. Only needs hammer and saw gauge. | $3,500.00 |
| Sharpeners (Other) | ||||
| New Mexico | Sharpener: Knife | 10262 | 4-place knife grinder. Used to make and sharpen moulding knives | $3,000.00 |
| New Mexico | Sharpener: Knife | 10263 | 2-place knife grinder. Used to make and sharpen moulding knives. Used mainly with the Glover dowel machine | $2,000.00 |
| New Mexico | Sharpener: Knife | 10264 | Electric set up stand. 2 HP motor with belt drive | $2,000.00 |
| Slab Belts/Racks | ||||
| None currently available. | ||||
| Sorting Tables/Decks | ||||
| New Mexico | Sorting Table | 10267 | 12" x 20' trim tables and sorting tables | $3,000.00 |
| Sweep Tables | ||||
| Connecticut | Sweep Table | 8995 | Sweep table, 8'x12', pushes boards and edgings from edger to outfeed conveyor. Designed for edgerman to offload boards and send edgings away from the sawmill and edger. 3 HP 3-phase power. | $2,500.00 |
| Stacking Decks | ||||
|
None currently available | |||
| Table Saws | ||||
New Jersey |
Table Saw | 12293 | Grizzly table saw with custom jig and air clamp for producing wedges/hubs. Accepts 1 ¾” square stock and makes 6”, 9”, 12” wedges | $1,200.00 |
| Top Saws | ||||
Michigan |
Top Saw | 11096 | CMC top saw system with arbor, 30 HP motor and starter, no blade. | $2,500.00 |
| Trailers | ||||
| Ohio | Trailer | 10891 | 1969 Great Dane 45' single drop trailer, completely new break system, new wiring, new air system. | $9,500.00 |
Alabama |
Lumber Deck | 13050 | 30' 3-strand lumber deck, H30 rooftop chain, 3' live outfeed conveyor, 10' outfeed chain. | $10,000.00 |
British Columbia |
Resaw Transfer System | 13066 | High capacity resaw transfer system: Infeed deck assembly consists of 16’ x 16’ x 8’ 3-strand hydraulic infeed deck,5’ x 20’ steel walkway, 36" x 4 roller arm belt/lifting transfer,14" x 24’ speed belt trough,24’ roller infeed. Outfeed consists of 5' x 10' 6 roller outfeed table. Belted return trough, 16" x 35’, air kickers within roller case for returning material, landing table for infeed. | $16,900.00 US$ |
Indiana |
Transfer Deck | 12406 | Custom built 3-strand live transfer deck, 8' width x 10' length, hydraulic motor, does not include power pack or pump | $1,950.00 |
| Trucks | ||||
|
New Listing Georgia |
Truck | 13289 | 1973 FWD 6x6, International DT466 diesel engine with 13-speed transmission, 55,000 rears. | $5,000.00 |
Indiana |
Truck | 12069 | 1986 GMC roll back (the bed rolls back) truck, CAT diesel motor, 5 spd transmission, includes a large winch. | $6,000.00 |
Maryland |
Truck/ Trailer | 11272 | 1990 Dodge 1-ton, new 5-speed transmission, 5.9 Cummins, new tires, 8' diamond plate aluminum flatbed, replaced rear end with Dana Super Duty. Fully customized with 48" sleeper, two 50 gal. stainless steel fuel tanks. | $6,500.00 |
| Pennsylvania | Truck | 10599 | 1979 Ford tandem log truck with Prentice Model H knuckleboom loader, 44800 GVW, double valve 180-degree turn, 4-post log bed, headache rack, 6V53 Detroit engine. Solid truck. Road worthy. Kept inside. | $8,000.00 |
Pennsylvania |
Truck | 11342 | 1974 Mack Interstater, 237 motor, 5-speed, 387 Mack rearends, motor completely rebuilt, custom rolled and pleated interior, drive tires are all new recaps. | $4,000.00 |
Pennsylvania |
Truck | 12107 | 1977 Kenworth, custom built 26' industrial tandem tilt bed for hauling skidders, dozers, other heavy equipment, two 11' triple mast cylinders, can tilt straight up or has separate valve that moves bed 11' back before tipping, 3406 Cat motor, 13-speed Road Ranger transmission, 20-ton Braden winch, double framed. | $18,500.00 |
Pennsylvania |
Truck | 12963 | 1999 Ford F-450, with brand new (200 miles) V-10 gas engine, all new brakes, including parking brake assembly, roters, calipers and hardware. The truck is an automatic with overdrive and has a 2000 lb liftgate that works well. It does have A/C but needs recharging. Good glass all around, all the lights work. 230,000 miles. Excellent condition and is ready to go to work. The only problems are a tear in the drivers side of the bench seat and the toolbox on the passenger side needs a latch. | $6,900.00 |
Wisconsin |
Truck | 12117 | 2000 Sterling sawdust truck, 210 Cat diesel motor, 7-speed, new 18' steel dump box, 5' sides, new roll top, good tires, 33,000 GVW. 212,000 miles. | $27,000.00 |
All information as to age and condition of these used sawmills listed by Sawmill Exchange is supplied by the sawmill owners. No warranty is either expressed or implied by Sawmill Exchange.
All equipment listed above is for sale by private owners. If you are interested in talking with any of the owners about their equipment for sale, please contact us at: U.S. Toll Free: 800-459-2148 / Local: 205-969-0007
Links to Equipment for Sale Pages
Manual Feed Band Sawmills
Automatic Feed Band Sawmills
Hydraulic Band Sawmills
Higher Production Band Sawmills
1-2 Man Circular Sawmills
Handset Circular Sawmills
Auto/Semiauto Circular Sawmills
Support Equipment
Complete Sawmill
Operations
Auxiliary Equipment
Industrial Equipment