Weinig U17A

Location: Texas WEINIG U17A 7-Head Feed Through Moulder with Hopper Feed%0D%0A6972%09 Tauberbischofsheim, Made in Germany 1981, Machine no. 1287-1939 Working Capacity: 6-3/4%E2%80%9D x 4-3/4%E2%80%9D %0D%0AElectric: The machine itself is dual voltage 230/460 so are all the motors, the label from the factory says it was wired 230 voltage but the control transfer is physically wired for 460 so we think the machine has been converted to 460, the overloads on it confirm that, so does the delta configuration on the motors. Head sequence: %0D%0A1.%09Groover/Surface Planer- 5HP (4kw)%0D%0A2.%091st Right Side- 5HP (4kw)%0D%0A3.%09Left Side- 10HP- (7.5kw)%0D%0A4.%092nd Right Side- 7HP (5.5kw)%0D%0A5.%09Top- 10HP (7.5kw)%0D%0A6.%09Bottom- 7HP (5.5kw)%0D%0A7.%09Universal- 5HP (4kw) 7 Spindles: All 1-1/2" diameter with cutterhead speed of 6,000 RPM Feed: Cardan (chainless) Feed drive- 5 HP (4kw) 18 to 118 FPM Motorized raise-and-lower of overhead feed beam: Lift unit motor .5HP (.37kw)%0D%0AAir loaded feed rollers%0D%0AEquipped with 78%E2%80%9D infeed table with manual table lubrication pump%0D%0ADevice for processing short pieces%0D%0AN%C2%B0 15 cutter-heads for planing- (we also have pallets of extra heads for additional sale)%0D%0ASpacer rings for shafts%0D%0AThe machine is complete with wheels and accessories kit%0D%0ACannot locate the manual Shipping/Transportation: We have a fork lift on site to help load, but you are responsible for shipping after payment. Approximate Dimensions:%0D%0ALength- 190%E2%80%9D%0D%0AWidth- 62%E2%80%9D%0D%0AHeight- 60%E2%80%9D%0D%0AWeight %7E10,000 lbs %0D%0A