Advanced Filters
Category
Subcategory
Sold
Lumber Tiger Resaw With Floating Head
$75,000 (USD)
716-490-1278 Resaw System 16" x 16" x 12' capacity with 2" x 26" band wheels. Footprint is 11' wide by 40' long, featuring a complete runaround system. All-hydraulic system powered by a 4.5, 4045T John Deere engine. This resaw is in excellent condition.
Sold
Timber King Band Mill
$7,999 (USD)
646-739-0721 , This 2017 mill has been kept under a roof and well-covered, showing very minimal use. It features an 18 HP Vanguard engine, includes 31 brand new blades, a 5-gallon lube reservoir, and roller guides. This is a 4-post, like-new mill.
Sold
Double Head Shop Built Resaw
$7,000 (USD)
816-539-7274 / Line shaft ready unit with no hydraulics and no air requirements. Currently in working condition.
Sold
Keystone Double Head Notcher
$22,000 (USD)
434-270-4851 Pallet stringer notcher in great working condition with 30 HP motors. Handles material from 28" to 72".
Sold
Fastline Super double band Scragg Mill also an edger and a resaw available
$39,900 (USD)
207-838-5602
Sold
2200 TIMBER KING bandmill/ with a Cat Claw band sharpener an tooth setter
$32,500 (USD)
If it goes to the eastern state check on the shipping!
Sold
2024 ProCut Single Head Resaw
$32,500 (USD)
417-465-2352 This unit was brand new in November 2024 and was built by ProCut. All included equipment is lineshaft-ready, featuring an 8' long green chain, a 6' dia. turntable, and hydraulic band tensioning. It runs 13'4" bands with adjustable feed speed and comes with extra parts. It remained in production until early October. Here’s a great opportunity—motivated seller.
Sold
2021 Woodpecker Pallet Nailer
$75,000 (USD)
814-795-5501 Includes a stacker with 84" x 64" capacity. Completely rebuilt by Woodpecker in 2021 and still in operation through October 2025. A solid, reliable machine—check it out!
Sold
L45B Volvo Wheel Loader
$40,000 (USD)
270-218-2446 2008 model with 9600 hours. Equipped with heated cab for operator comfort. Includes forks and bucket. Tires are at 50%. A reliable and solid machine ready for work.
Sold
FD35 Viper Forklift
$28,000 (USD)
270-522-3851 2019 model with 3-speed, 4-wheel-drive transmission, 3,485 hours, and a Cummins diesel engine. Lifts up to 7,700 lbs. Features include side shift, 3-stage mast, and an enclosed heated cab. Excellent condition.
Sold
6068 John Deere Power Unit
$7,500 (USD)
140 HP Power Unit – 2,850 Hours New turbo installed New clutch disc (Oct.) Murphy control panel Runs strong and ready to work 📞 Call 270-218-2446 – Make an OFFER today!
Sold
2012 SVL-75 Kubota Track Loader
$28,500 (USD)
724-475-4441 Only 4,500 hours! New undercarriage with multi-bar trac. A good, reliable machine – clean, well-maintained, and work-ready.
Sold
5.9 Cummins Power Unit
$7,000 (USD)
320-983-6543 , 160 HP with new WPT clutch and Murphy controls. In very good condition.
Sold
Meadows 2 Strand Live Deck
$6,500 (USD)
270-218-2446 22' long with hydraulic gearbox, stop and unloaders. In good condition.
Sold
36" Eagle Dust Blower
$1,200 (USD)
270-750-1054 This blower has very little wear and is in good working condition.
Sold
Complete Smicksburg Band Mill with Cornell Edger Setup
$38,000 (USD)
Includes 36" x 2" steel band wheels, an 01 Frick carriage and track, and a Cornell two-blade edger with side transfer and lasers. Also features a 22" x 20' conveyor belt and a log skid with half-moon turner. Powered by a 6CTA 8.3 Cummins engine with only 2,000 hours. Designed for a two-man operation and in very good condition. Willing to split the package if you wish. Write to Benuel Beiler, 433 Wolf Hollow Rd., Turbotville, PA 17772.
Sold
Bill Turner Band Mill
$25,000 (USD)
518-530-0566 / Custom made band mill that is 27' long and has a 23' cutting length capacity. Subaru Robin 38 hp engine and a brand new spare engine. 12v manual setworks, 20.5" rubber tire band wheels, all hyd log loader and etc. with a separate hyd engine & pump.
Sold
S & W 2 Blade Edger
$4,500 (USD)
814-512-3656 / 1 stationary blade, 1 movable blade, 14 hp Kohler electric-start gas engine. 2" x 14" cutting capacity, 7' infeed rollers & 8' outfeed table. Power feed through the edger. Carbibe blades. Easy to add a larger engine or mount an electric motor, heavy built frame work. Good condition.
Sold
Accu-Cut Edger
$22,000 (USD)
231-825-0138 / BRAND NEW! Only 50 hrs! 2 blades, 1 movable, 4" x regular width, w/laserlights.
Sold
LT40 Wide Wood-Mizer portable Bandmill
$35,000 (USD)
845-354-8606 ,, 2020, 547 hr. on the 38 HP Kohler gas engine. Comes with a debaker. 41"x 21' long cutting capacity. 30 blades ( need to be resharpened ) This piece is in good condition. Call
Sold
2 Head Go-Fast Band Resaw
$4,500 (USD)
765-245-2544 ex1 Lineshaft ready with an 18 HP Vanguard engine, turntable, 6" returning belts, in operating condition.
Sold
Timber King B20 Bandmill, Edger, 30KW Genset
$25,000 (USD)
260-242-1278 The bandmill is fully hydraulic. Electric motors power the equipment. 4" x 30" capacity edger with two blades; one is movable. 30 KW Onan with a Cummins diesel 582-hour generator. Buyer has a complete unit; it is in good condition. Call for the deal.
Sold
Morgan 2 Head Resaw Package
$22,000 (USD)
620-238-5237 - 2018 (1 OWNER) with a return. 20' x 2" lineshaft and frame with a Whirlwind blower and a Morgan deduster. Complete package.
Sold
Morgan Chop Saw Package
$5,000 (USD)
620-238-5237 - 2018 - Includes the waste-away belt conveyor, hydraulic unit, and blower. The chopsaw has air stops and controls. Complete unit.
Sold
6466 John Deere Power Unit
$14,000 (USD)
816-539-7274 / COMPLETELY OVERHAULED UNIT!! Ready to hook up and run. 230 hp engine, NPT clutch, Murphy switch panel, 6c 10" pulley, air filters included, muffler installed. Clean, serviced, and ready for immediate use.
Sold
L40 Volvo Wheel Loader
$37,000 (USD)
270-218-2446 < CALL < , Includes forks and bucket, 1950 hours on the new engine, with new harness and new tires. The machine has 14,900 total hours.
Sold
Precision Debarker
$32,000 (USD)
814-594-9683 / Complete sawmill package rebuilt by Showcase Equipment in 2021. 50 hp electric motor on head, 15 hp electric motor on hydraulics, 36" x 16' log capacity. Includes air compressor, barn sweep, extra head, legs, steps & catwalk. Well-maintained and fully equipped.
