Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent co...
Tiptan Iron Works Swing Arm Cut off Saw, 20" blades, 10 hp electric motor, Hyd. feed cylinder, 18...
3 head block, 36" carriage, top saw, 60' long track, frame, husk, 60 hp carriage drive, cab and a...
Frontline 3 strand log deck, 10' wide x 25' long, hyd gearbox drive, stop-load arms, H-78 chain, ...
3 strand log deck, 10' wide x 18 long, Tulsa winch hyd drive, stop-load arms, H-78 chain, good wo...
drop belt, approx 20" wide x 12' long, hyd drive, good working condition Make: Unknown | Stock number: 9171
Mellott style log deck, 4 strands, 12' wide x 36' long, Tulsa Winch hyd drive, includes stop-load...
3 Strand log deck, 8' 6" wide x 18' long, electric drive, H-78 chain, good working condition Make: Unknown
3 strand, 84" w 38'2" long, #80 rooftop chain, ( no gear no power) LIKE NEW. Call 920-348-5767 fo...
2 strand transfer/ cant bunk, transfer deck has 2 pop-up arms 56" long for roll-case, 10' long de...
pan is 18" wide x 9" tall sides, 65' long, includes sawdust section, electric drive, good working...
Mellott shaker table, 16' wide x 6' long, hyd drive, excellent condition Make: Mellott | Stock number: 9186
20' long section, Jeffery vibrating conveyor, drive section included, working condition Make: Unknown | Stoc...
Carrier vibrating conveyor, 24" wide pan x 50' long, 12" tall sides, electric drive, very good co...
Barn sweep, includes approx 15' flat section - 25' incline section, hyd drive, Cornell style chai...
belt conveyor, 24" wide x 11' long, 2 sections, was used as off-bearing belt, good condition Make: Unknown
belt conveyor 24" wide x 40' long, no sides, good working condition Make: Unknown | Stock number: 9175
belt conveyor 24" wide x 24' long, no sides, nice belt and in good condition Make: Unknown | Stock number: 9176
Slab drop belt, 24" wide x 12' long, electric drive, hyd cylinder for drop belt, very good condition Make: U...
Roll case, 24" wide x 14' long, some rollers have spirals, no drive, very good condition Make: Unknown
roll case approx 24" wide x 30' long, end section has spirals, good working condition Make: Unknown | Stock ...
Roll case, 30" wide x 41' long, has several sections of spirals and several stops, very good cond...
Mellott Mfg. conveyor system consisting of; One (1) 8” x 30” x 14’ long – 6 roller with hold One ...
Dust cyclone, approx 36" dia x 6' tall, 8" inlet-10" outlet, includes stand and a few pipe adapte...
2019 Accu-Cut edger, 6" x 40" capacity, 3 blades- 1 movable set, variable speed in-feed, includes...
3 Blade edger, 4"x 30", 1 movable & 2 stationary blades, hyd infeed & outfeed & press down roller...
Remodeled Frick Edger, 4"x 27", 2 blade 1 movable, 10' infeed & 10' outfeed & blade adjustment is...
Cooks edger, 6" thick x 36" wide capacity, 2 movable blades, set up for tailing belt, hyd drive, ...
vertical edger, 2 split blades, 40 hp electric powered, good working condition Make: Helle | Stock number: 5124
Paxter Weld & Machine gang rip, 2 9/16" arbor, spacers & some blades, spring loaded powered press...
Cornell double arbor gang saw, 6" thick x 24" wide capacity, 2- 100 hp electric motors for arbors...
Shop built gang saw, 6" thick capacity, line-shaft ready, includes extra blades and spacers, rece...
Mellott #8 log chain type log turner, hyd drive, good working condition Make: Mellott | Stock number: 8058
36" chain type log turner, hyd drive, good working condition Make: Mellott | Stock number: 8057 | Updated at...
Model #7, 48 in. Hyd. drive, GOOD CONDITION Make: Mellott | Stock number: 8026 | Updated at: 2024-05-01 18:5...
"Hochstetler" band resaw, 12" x12" x 12' long capacity, line-shaft ready, complete run-around sys...
227 cutting hr. fully hyd. log lift, rest, front & back toe lifts, turner, & log clamp, power saw...
2022 Wood-Mizer LT40HD Super. 40 total hours, 38 HP gas engine, debarker, Lube-Mizer, Laser kit, ...
A Super Hyd. mill, 65 hp Yanmar 1047 hr. electronic setworks, in excellent condition. Call 937-46...
3000-4000 hr. mud saw, axle included (to make it portable) MOTIVATED SELLER. Call 276-472-2199 fo...
With a 4045 John Deere, 1350 hr. on the mill, E type controls, hyd. setworks, debarker mudsaw, (n...
Fully hyd. with a 35 hp. Deutz diesel with 1661 hr. log turner & log loader, + 20 bands, Cct Cla...
200 Hp , -3000 hr. WPT clutch with a 8'' 8 groove C pulley, turbo, a good running engine. Call 93...
250 hp. WPT clutch with a 14" 10 groove C pulley, this engine needs to be rebuilt or take it for ...
Brewco 2 head resaw with complete run-around system, electric/ hyd powered, good working condition Make: Brewco
With a 24 HP Honda engine, a new idle shaft was replaced, it is an older machine but is still in ...
2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw wit...
8' x 8' screen, electric drive, includes the chip cyclone, good condition Make: Fulghum | Stock number: 7093
Morgan double end trim saw, 6" thick x 68" long capacity, line-shaft ready, feed is hyd driven, g...
48" 6 knife chip-pac, includes 5' x5' shaker screen, electric drive, includes soft start, numerou...